Hello,

Mostly im working with overmolding cables and housings with TPE and PA. Biggest problems are tolerances of cables that are sometimes big and also in some tools cables need to be under some angle (moslty 90 degrees), so almost always i have some damage or some marks on cable jacket. That is not aceptable by quality control in my company (even thou is ok by IPC standard) so i need to find solution.
I was wondering is it on market some type of silicone or rubber coating for steel parts that can be flexibe so it wont damage cable jacket, and to ressist temperature up to 240 C (464 F) and injection preassure up to 500 bars (7250 psi).
Puting rubber or silicone is just some my idea (did it with super gule for testing and it was fine ), but if there is any other options, i would like to know about them.
Click image for larger version. 

Name:	20171226_093541.jpg 
Views:	16 
Size:	194.2 KB 
ID:	240
Picture of one of inserts of better idea what problem is.

Thanks,
Nemanja.