Results 1 to 2 of 2

Thread: Thermoplastic Cool Polymers - Celanese -D5506 LCP

  1. #1
    Join Date
    Dec 2017
    Posts
    1

    Thermoplastic Cool Polymers - Celanese -D5506 LCP

    Hi Everyone,

    We are a custom molder in Southern Indiana. We use a thermoplastic Cool Polymers - Celanese -D5506 LCP. Our vendor requires us to use only virgin resin. Therefore we leftover Runners/Gates we have to scrap. Curious if anyone on here may use this resin (or know someone who does) that is looking to buy the scrap from us. They would need to regrind it themselves. Any assistance would be greatly appreciated. Have a good day everyone!

    Ryan Harvey

  2. #2
    Join Date
    Aug 2011
    Posts
    535

    Re: Thermoplastic Cool Polymers - Celanese -D5506 LCP

    Hi Ryan,

    It is a difficult sell. The best approach is to 'quietly' find out from your supplier who else uses the same material. Then ask them if they can buy your runners. The reason I say 'quietly' is because you are now competing with your supplier.
    There are companies who buy runners also, I think.

    Regards,
    Suhas

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •