-
20th November 2017, 03:57 PM
#1
granulator
I'm looking for suggestions on large press side granulators. We currently do not grind our scrap at the machine and I can see a huge benefit if we started to do so. We run large normally flat TPE parts ranging in size, sometimes they can be as large as 3'x5'. Noise is a concern so if possible I would like to hear recommendations on low speed granulators.
-
20th November 2017, 10:53 PM
#2
Re: granulator
I have used Conair and Matsui low speed grinders. Worked rather well, but we used hard materials like PC and Nylon.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules