Results 1 to 2 of 2

Thread: Hushlloy HS110

  1. 26th January 2017, 11:07 AM #1
    Liam peps
    Liam peps is offline Junior Member
    Join Date
    Oct 2016
    Posts
    1

    Hushlloy HS110

    Hi everyone.

    I'm having problems processing the above material and can't find any processing data online. I've tried prospector but its not on there.

    The machine is a negri 1100T. I am using a 5 gate SVG unit with 16 HR zones on it. The part is being filled sequentially from the middle gate.
    The shot weight is 100mm of a 600mm max screw. The diameter of the screw is 120mm. Current runner temps are 275, same on nozzle tip.

    Have tried to obvious, barrel temps, runners, screw speed, back pressure and so on.

    My thoughts are that this material is anti squeak, what are the additives that have been put in with this ABS to make it 'anti squeak'? Are these additives breaking down during material melt?

    Hopefully someone can help, Thanks in advance.


    p.s material has been dried and was used on the previous tool in this machine. The feed system is closed loop.
    Reply With Quote Reply With Quote
  2. 26th January 2017, 02:47 PM #2
    JayDub
    JayDub is offline Senior Member
    Join Date
    Aug 2014
    Location
    Saint Paul, MN
    Posts
    181

    Re: Hushlloy HS110

    Can you be a bit more specific about the problems you are having?
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules