Results 1 to 4 of 4

Thread: D3 processing

  1. 17th December 2015, 06:55 PM #1
    Brian Snider
    Brian Snider is offline Junior Member
    Join Date
    Jan 2014
    Location
    Hart Michigan
    Posts
    5

    D3 processing

    We are seeing a major difference in pressures when running a mold in a 500 ton Toshiba machine versus a 720 ton Toshiba machine. What we are seeing is an 800 psi delta difference between Post Gate and EOC at transfer in the 720 ton machine compared to less than 100 psi delta in the 500 ton.
    Any thoughts?

    Thank You
    Brian Snider
    Reply With Quote Reply With Quote
  2. 18th December 2015, 04:34 PM #2
    JayDub
    JayDub is offline Senior Member
    Join Date
    Aug 2014
    Location
    Saint Paul, MN
    Posts
    181

    Re: D3 processing

    Have you molded samples of fill-only (no pack/hold pressure) parts in both machines to confirm that you are transferring with the same percentage of a full part?
    Reply With Quote Reply With Quote
  3. 18th December 2015, 06:02 PM #3
    rickbatey's Avatar
    rickbatey
    rickbatey is offline Senior Member
    Join Date
    Aug 2011
    Location
    Upstate of South Carolina
    Posts
    701

    Re: D3 processing

    What about screw sizes and response of the hydraulics between the two machines?
    Rick.
    Reply With Quote Reply With Quote
  4. 20th December 2015, 03:32 AM #4
    Suhas
    Suhas is offline Forum Administrator
    Join Date
    Aug 2011
    Posts
    625

    Re: D3 processing

    Good Points above.
    See if you can download my free Scientific Molding App. It has a Process Transfer function you can use and you should be able to predict the process in the second machine. Tell us what you find.
    Suhas
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules