Reliability

[rickbatey]

First off, my recommendation for press brands based on tonnage or technology won't change! An Engel can ruin you due to their trouble free running and precision. If your getting a new press you really can't beat a CC200. Any machine sequence you need or imagine is a few strokes away.
Scott-the only thing I consider possibly better on a KM versus an Engel is the cores. On a KM cores off are ignored as long as there aren't signals for IN and OUT. Engel requires signal jumpers in the mold box for cores not used. The sequence is a little clunky to write something exotic or special on a KM; Engel is much easier even when doing sliding blade core 2K work.
All- if you get your hands on a tie bar-less press from little to 600t; you'll NEVER go back willingly!!
Rick n

[brentb]

yes toTL

KOM

brent

[Airwinghma]

Greetings;

We have a 2003 Ergotech 80-430Extra with the NC4 controller

Scott