-
3rd February 2015, 05:58 PM
#1
Barrel measuring equipment.
What is everyone using to get accurate measurements on their barrels?
-
3rd February 2015, 06:07 PM
#2
Re: Barrel measuring equipment.
We have them measured by one of the aftermarket suppliers.
Rick.
-
4th February 2015, 12:21 AM
#3
Re: Barrel measuring equipment.
Agreed with Rick, since this take a little finesse and accuracy. You can use the ID gages and/or use one those telescopic 'thingees' - sorry, drawing a blank here , puss them out and use a pair of calipers.
Suhas
-
4th February 2015, 03:36 PM
#4
Re: Barrel measuring equipment.
we use telescopics gages
BR
-
4th February 2015, 04:44 PM
#5
Re: Barrel measuring equipment.
Plastic Process Equipment for one sells everything you need for this,including telescoping inside micrometers/gages. Don't forget the screw! There are screw "mike" and also measure your NRV OD.
KOM
brent
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules