Page 2 of 2 FirstFirst 12
Results 21 to 23 of 23

Thread: Need some help pulling a screw...

  1. #21
    Join Date
    Jul 2012
    Location
    Belle Vernon, PA
    Posts
    141

    Re: Need some help pulling a screw...

    Upon cleaning my screw from my Shinwa, I've noticed a gouge has been taken out of it. It's pretty deep, about 1/8" deep by 1/4" wide. Along with that, tons of scratches. Can someone confirm that this is the cause of my specks?

  2. #22
    Join Date
    Aug 2011
    Location
    Upstate of South Carolina
    Posts
    701

    Re: Need some help pulling a screw...

    What color were the specks? Blue I believe? I'd say that was from the resin as many light colors have some blue added to offset the yellowing that can occurr when melting.
    Now you do need to fix the problem; what does the barrel look like? I'd expect some damage since the screw was so bad. You could opt to have the screw welded and chromed again. Or contact someone for a replacement. I can get you the names of some folks that should be able to help for a good price.
    Rick.

  3. #23
    Join Date
    Aug 2012
    Location
    Bangalore, India
    Posts
    4

    Re: Need some help pulling a screw...

    Dear,

    Better you can see your machine manual,they may given you the exact details off pulling the screw with all the details like LH thread and other details.

    mani

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •