drying parameters for technomelt PA 638

[dinho]

thank you for your feedback, i will check this.

[Jendalf]

Hi,
Rick is probably right, this seems like process temperature setup in the IM - not drying.

[nemanja]

Hi,

On Technomelt 678 im using 30C for 4h, and that solved this problem for me. On datasheet is saying that drying is not required but without, surface of parts are like moon surface because of bubbles.

[dinho]

Nemanja Thank you for your feedback, I used the exact parameters you mentioned, then the problem was solved.

Salutations.