-
9th September 2022, 03:40 PM
#1
Injection Profile Engel Emotion 310
Hello,
We are setting up to do some process development on a tool. We have not been to able to figure out why our injection pressure is peaking around the same position during injection regardless of injection speed. Injection Pressure Limit is set to machine max (29000)
6.000 in3/sec [html]https://snipboard.io/9doeOa.jpg[/URL]
3.000 in3/sec [html]https://snipboard.io/Tjc02w.jpg[/html]
2.000 in3/sec [html]https://snipboard.io/2efSbm.jpg[/html]
Engel e-motion 310 (2016)
ABS
Melt Temp: 440
Hot Runner: 460
Melt Delivery: Hot Tip
We are wondering if it could be a setting on the injection page that might be causing issues or possibly if the hot tips need to be "warmer" so we don't generate as much pressure trying to inject. No idea to be honest but we will be continuing to adjust settings and send any updates.
[html]https://snipboard.io/M4oVjU.jpg[/html]
Any feedback would be great!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules