-
29th March 2022, 12:09 PM
#5
Re: “Splay” issue on PA66 GF30% with UV stabiliser.
Hi,
No leaks. Potentially condensation. Tool temp it 60c both FH - MH. Residence time is approx 5mins across barrels of 105mm and 80mm. Yes, already tried the increased temp and time. It’s so inconsistent as it’s running again and ok. “Splay” appear across the part not always as close to the gate though.
Thanks
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules