Results 1 to 2 of 2

Thread: Gloss level improvement for HDPE

  1. #1

    Gloss level improvement for HDPE

    Dear Members,

    Our company want to produce one article "Watering Can" - the process will be made by the blow mold equipment, we have the HDPE (prime granules special for 10 L water can) + green masterbatch granules to make the green color.

    The problem that we encounter is that the surface of the water can need to be shining (shining green) - what we will need to add for the HDPE to make the shining surface?


    Thank you

  2. #2
    Join Date
    Aug 2011
    Posts
    624

    Re: Gloss level improvement for HDPE

    Hello,

    I hope someone can answer your question here. We are all into Injection Molding primarily.
    But with my experience in Injection Molding, I am not sure if you can get good gloss via blow molding. In injection, we use high pressures but those are probably not available in blow molding. I hope I am wrong. Please keep us informed.

    All the best to you!

    Suhas

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •