-
29th October 2021, 04:12 PM
#1
Re: Masterbatch material dispersion
Hello,
This could be a processing issue, you need better mixing. Try:
1. Increase the melt temperatures
2. Increase screw rotation speeds
3. Increase back pressures
Let us know if any of this helps. Also make sure you are not using a very large barrel for a small part.
-Suhas
-
1st November 2021, 01:44 PM
#2
Re: Masterbatch material dispersion
Thank you for the information! We will apply the process that you recommended us and we will come back to inform you if that work.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules