Results 1 to 2 of 2

Thread: Dosing Problem

  1. #1
    Join Date
    Oct 2020

    Dosing Problem

    We frequent dosing Problem in our Fanuc 26 Screw dia machine
    While Processing both PA 66 and PA 46
    For ex
    We are setting barrels temp like this. From front to feed
    280,275,270,265,75 Deg C
    For Processing nylon 66 Black 30GF

  2. #2

    Re: Dosing Problem

    Maybe try a smaller hopper, on a machine with a 26 mm screw the feed throat is tiny, maybe material is clumping together and not falling due to the tight opening.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts