-
12th August 2021, 11:19 AM
#1
Nozzel plugging
Hi all,
New day with new injection molding problem. The issue this time is nozzle plugging, we face this problem during the start-up and sometimes when the machine works in automatic. We have a valve gate hot runner and the material is PA66GF30, for the temperature I work with 290 °C as a maximum in the hot runner system. Yesterday with a mold of 4 cavities and after 4 cycles of production one of the cavities was blocked.
If there are Any suggestions that can help us to avoid this issue, I will be grateful. Thank you!!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules