-
24th March 2021, 05:02 PM
#1
Klockner Ferromatik FM175 1990 p.d.
Good day! Please help who knows -- not enough clamping force. Maximum 720 KN achived while 800KN is minimum clamping force to set.Please give me an advice where to search for the problem.
-
25th March 2021, 05:09 AM
#2
Re: Klockner Ferromatik FM175 1990 p.d.
i am not familiar with the machine, but if it isn't making tonnage on a toggle machine i would check the linkages and see if the cylinder is loose.
-
1st May 2021, 09:04 PM
#3
Re: Klockner Ferromatik FM175 1990 p.d.
Problem solved! After changing few pomps the prussure was achieved after fixing oil purity sensor. Obviously there was no need to change pumps.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules