-
16th January 2021, 11:33 PM
#1
KM 175/700/C2 35 mm Screw is stuck
Had a check ring on the screw fail and when I went to pull the screw out of the barrel it was pulling smooth right until the check ring got within 2 inches of the feed throat. I have been trying for 8 hours to free this darn thing but can't get it to budge. Any suggestions?
PS I did have the barrel hot and had purged all the plastic out. Even with the barrel cooled off I can rotate the screw by hand and wiggle it back and forth with normal check ring movement. The check ring is just stuck/wedged.
Any help is very appreciated.
Thank you
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules