Results 1 to 4 of 4

Thread: milacron vt110

  1. #1
    Join Date
    Jan 2020
    Posts
    1

    milacron vt110

    I have a vt 110 that the linear transducer for the injection is only reading 0.00 to 0.04 wont go any higher. Tried a known good one from a working machine. Still the same 0.00 to 0.04 any ideas on what could be wrong.

  2. #2
    Join Date
    Jun 2014
    Location
    EU
    Posts
    125

    Re: milacron vt110

    Input card reading the position from transducer.

  3. #3

    Re: milacron vt110

    i would test the wiring first, unless you have a spare dsp board in storage. Also make sure you have the MCL and the screenware ready, its always a roll of the dice when you power it down for any reason.

    what controller is on the Machine?

  4. #4
    Join Date
    Sep 2020
    Posts
    7

    Re: milacron vt110

    May be the input number is wrong.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •