Hi everyone,

Short introduction:
New member here, my name is Ferenc, working in the injection molding industry since 1999. Right now as a process engineer. We have Engel cc100-200-300, Fanuc Roboshot s* α*, Krauss-Maffei MC3-4-6, machines in the 25-800 ton range. Robots: Engel (integrated), Geiger, Fanuc from RJ3 to R30iB plus, Wittmann. All programmed/setup by me. (I'm working mostly with robots these days)

My question:
Does anyone here managed to setup a network drive on an Engel cc300 controller? We tested the connection with a crossover cable and static ips but no luck.
I can ping the machine from the pc, but no matter what folder I share, I got network drive not found on the machine.
The main purpose behind this is that we want to save micrograph data continuously, and don't want to use flash drives.
Thanks for any input.