Results 1 to 4 of 4

Thread: How to control the pressure when molding?

  1. #1
    Join Date
    Aug 2019
    Posts
    4

    How to control the pressure when molding?

    Can you give some tips to control pressure on the molding process?

  2. #2

    Re: How to control the pressure when molding?

    One of the basic rules of scientific injection molding is among the most frequently broken: aim for 95% to 99% filled parts at transfer before packing. (adding pressure)

  3. #3
    Join Date
    Aug 2019
    Posts
    4

    Re: How to control the pressure when molding?

    Thanks for your valuable comments.

  4. #4
    Join Date
    Sep 2019
    Posts
    4

    Re: How to control the pressure when molding?

    First you must find where the pressure you are trying to control is coming from. Nozzle, sprue, Hot runner if you have one, gates and so on.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •