-
29th April 2019, 09:35 AM
#1
Accuracy test technique (Inspection & Calibration)
Hello,
Who has
Instructions for inspection and calibration of injection molding machine
-
30th April 2019, 12:02 AM
#2
Re: accuracy test technique
I do believe they are different per machine. Also what are you calibrating (load sensors, platen parrellism, etc)
-
30th April 2019, 04:02 AM
#3
Re: accuracy test technique
I have to issue a document, I need a sample
-
1st May 2019, 12:07 AM
#4
Re: accuracy test technique
Sorry, I don't have anything written. Usually just have a tech from the machine manufacturer come out and do calibrations or walk me through it (for calibrating sensors or transducers for example). Some of it I know how to do with out them. Once again however, each machine is different and depending on what you are doing for calibrations they are vastly different. Probably better if you give the group some information. If you just need a format of how to write a document you can just google formatting.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules