-
28th March 2019, 06:17 PM
#1
Platen chatter and drift
Demag Van Dorn Extra 55-200 (or at least that's what it looks like) mold will open but not reach set point. just prior to set point hydraulics will chatter. Can manually stay on open button to reach set boy. Moment button is released the hydraulics drift forward. This happens regardless of the value of the set point. Have tried purging any air from the lines using the procedure in the manual.
Last edited by SoupToNuts; 28th March 2019 at 06:58 PM.
Reason: Typo
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules