-
21st December 2018, 06:21 PM
#1
Calculation Method for Clamping Force needed
I need to understand the calculation method for the clamping force needed depending on the part dimensions, cavity, and machine pressure injection.
Here is what I have:
1.- See the part dimensions attached.
note: dimensions in inches
Part weight: 46 grs.
2.- The number of cavities is 4
3.- The machine pressure injection is 213 Mpa.
4.- The part material is Nylon 6/6
Is this data enough to calculate the CF?
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules