Results 1 to 3 of 3

Thread: RJG Dynamic Cavity Imbalance

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jun 2018
    Posts
    1

    RJG Dynamic Cavity Imbalance

    Can anyone advise how to perform RJG Dynamic Cavity Imbalance?

    Many thanks

  2. #2
    Join Date
    Aug 2014
    Location
    Michigan
    Posts
    71

    Re: RJG Dynamic Cavity Imbalance

    You essentially turn off pack/hold and get the parts about 95% full under the same conditions you derived in your fill viscosity study. Then weigh each cavity and see how balanced your fill is. There are many reasons for an imbalance; differences between cavities, worn gates, unbalanced cooling lines and different shear histories just to name a few.

  3. #3
    Join Date
    Aug 2011
    Posts
    624

    Re: RJG Dynamic Cavity Imbalance

    Also make sure to have a charge (rotation) delay time of may be 5 seconds also. if not, since the gate is not frozen the back pressure may fill your parts.
    -Suhas

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •