-
13th December 2019, 03:49 PM
#1
Krauss Maffei MC4 IPC
Hi
I recently changed the IPC in a Krauss Maffei MC4 machine. Now i need some of the programs on the old IPC.
The machine are backed up with work so I cant stop it and change IPC again.
I tried to start the old IPC without connecting it to the machine, but it seems it cant start without communication whit machine. (see picture).
Can anyone tell me if it is possible to start the old IPC without connecting it to the machine ?
Ivar
-
28th January 2020, 09:11 AM
#2
Re: Krauss Maffei MC4 IPC
did you change the hard drive from your original.
-
31st January 2020, 12:33 PM
#3
Re: Krauss Maffei MC4 IPC
Problem solved. I changed back to the old IPC, copied out the programs to an USB stick. Changed back to the new IPC and copied in the programs from the USB Stick.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules