Search:

I'm all set for now. The backup battery is bad and it looses calibration settings on each shutdown. Arburg was able to help me out via email to get the calibration settings put back in.

All manual...

And little further info... Screenshots were sent to Arburg in Germany. They were very quick to respond via email, but only to send me to Arburg USA. He did say that "You must contact Arbrug Service...

A little further info this morning. The machine was left on with motor and heaters running for a few hours (s600 alarm still showing). The hydraulic oil and heaters come up to temp fine. I can now...

Ok, a little progress but still no hydraulic movement. In the first screenshot of my previous post, the error was f911. On the screen in the f911 position is the baud rate for the printer. This is...

There are a lot of garbled values on the screen when first powered up. After loading settings from the tape drive, most of the values show something reasonable as far as I know. This is when the...

Pump rotation is correct, I checked that first. :)

Safety gates are closed, but I should double check that the switches activate on the screen. Will do that this evening.

I disconnected hoses...

Hello.

I have acquired a 1987 Arburg Allrounder 170 CMD 145-50 which is supposed to be in working order. Perhaps someone is familiar with the operation of this machine to give some advise before...