Mark this one as solved.
What I did to solve the issue?
-Installed a new 2 zones MTC set the mold cores at 45C and the cavities at 20C
-Made a reduction of temp (220C to 215)on the thermal...
Type: Posts; User: Horeki; Keyword(s):
Mark this one as solved.
What I did to solve the issue?
-Installed a new 2 zones MTC set the mold cores at 45C and the cavities at 20C
-Made a reduction of temp (220C to 215)on the thermal...
Yep, I’ve already installed a new solenoid valve and line for each frontal air ejector and put a little delay of 0.1s on 2 of them and it works better. As you mention I think the issue it’s a over...
Thanks for the advice.
I can’t redesign the mold, the thing I did was to alter the ejector solenoid valve activation sequence and got better results.
Actually I’m not running the process without...
I don't think its a friction issue, since the contraction of the piece it's blocking the air ejectors.
Actually I reached a good result turning off completely the chiller.
VIDEOS
CHILLER OFF AND...
Hi, guys.
Im having some trouble with a new clear cup made of PP random copolymer DATA SHEET
At the moment of the ejection I feel that the piece contracts too much on the core and fails to...
Hi everyone!
Im ruling right now a very large thin wall IML project, the process is stable right now with scrap rates of 0.75%, and everything it's going well, but after a few days of non stop...
Yes, just fixed it during the Tuesday morning (4am) after a long fight!
This is what I did to fix it:
Reduced shot size 0.15mm (63.50mm - 63.35mm) problem persisted but I noticed it was...
Hi Rick!!
Yes it is a thin wall IML high speed process.
Recovery time takes around: 5.84s - 6.13s
Im able to monitor recovery pressure it is set to 12 and the real value its around: 11 - 14 kgs...
Hi.
Im having trouble with my process, some times my cushion gets a sudden and apparently random reduction of about 1mm and this always causes a piece to stick to the core.
Resin PP: Indelpro...
SOLVED:
I just had to reduce a little of injection speed (210mm to 200mm) and temp on the drooling cavity nozzle.
Hello everyone and thanks in advance!
I have a leaking nozzle in a 2 cavity...
I’ve tried already augmenting cooling time alone and the problem persists.
All guides and the processing guide of the resin maker points that core sticking is caused by overpacking and suggest to...
Yesterday some corporate fool decided that it was a good idea to change production resins, so this morning I received a few tons of formoleme 2550A (pp coopolymer) and not my usual formoleme 4142T...
https://imgur.com/sXu3fdK
https://m.imgur.com/a/gCGHOn0
The label is destroyed at the rim, some times the label pases tru the rim.
-2 cavity arranged vertically ( I don’t like the arrangement but the EOA came like that).
-Split line located at the cup rim.
-Reduced clamping force and it just got a really bad flash.
-Reduced...
It recently came back from maintenance with and external provider and it’s the doing the same.
Purge the air from the lines, locate some plugs on the manifolds of the grease lines and open them, after that manually pump grease with your machine controller. If you can’t find any plugs just...
Hi, everyone.
I’m having some trouble with some defects after long production runs.
Production starts normally without an almos 0% rejection rates, but after 12 hours the rejection rate...
Error code #?
Lube pumps tend to to fail when there’s air in the system.
Try purging the air from the grade lines.
Try changing screw RPM or augmenting injection speed. Another thing you should check is your temperature profiles, since you work with thin wall I assume your cycle it’s really fast and the resin...
You are right, this isn’t normal at all.
Last Sunday we inspected all the platens and movement system and found nothing, exchanged molds one from the same mold maker and another from a different...
Fixed!!
Changed opening speed from: 37%>52%>74%>100%
To: 100%>100%>100%>100%
And the thumping sound completely disappeared.
The machine it’s a 100% electric (my first one) and I’m not sure if...
Thank you for the advice, I did the 2 tests you suggested:
1) I didn’t notice any strange sound
2) Closed mold with high pressure clamp (normal) open at normal speed an when clamp pressure opens...
Hi, I’m new in the forum.
Recently I got a new Toyo SI-6 180, I’m using the machine to mould IML containers, after a few months of using the machine it started to make a loud noise when mould...