Hi pjhall,
The rubber i used is thermoplastic elastomer.
Best Regards,
Hendrich
Type: Posts; User: hendrich; Keyword(s):
Hi pjhall,
The rubber i used is thermoplastic elastomer.
Best Regards,
Hendrich
Hi Rick,
I use water temp 30 deg celcius and i put 4 line for core and cavity. And for update, the machine running with 20 s cooling time and i get good part also with quality measurements i get...
Hi all,
I am already did Cycle Time Study Report. Before the machine running 58.6 s cycle time. Now machine running with the 48.1 s cycle time. I am also already try with 43.1 s cycle time but...
Hi robert,
Thanks for your advise, i am very appreciated.
best regards,
hendrich
hi nemanja,
For the cooling system was i used hot water 30 deg celcius for cavity and core both mold ( 2K mold) first shot and second shot mode. and for the cussion material is'nt stable, and...
hi brent,
i adding the value of injection pressure because the part get bubble and i reduce the injection pressure for flow line issue...
for the both issue (bubble and flow line) what the best...
hi suhas,
the mold temp is stable, also the vents are clean. how to make injection stable, what study i should to do ??
in that case, we use Haitian brand, i already study cavity to cavity...
Hi brent,
i adjust the injection pressure from control panel of machine. And for the material i use AlphaGary Evoprene™ G 968 SEBS Thermoplastic Elastomer. I already study for cavity to cavity...
Dear all,
please help me how to lock the display of panel touchscreen haitian machine IA 3600 b-j, because some people don't know the machine just try and try to solve the issue without knowledge...
Hi all,
in my company i work for, there are have plastic molding injection use rubber material. There is issue about injection pressure, if i decrease the injection pressure than the bubble issue...
just try ...
probable cause from machine is injection (speed/pressure/flow) or back pressure too high. and the melt temperature also can affect for this cause and you can reduce it.
best...
you mean form for production output ?
if correct, give me you email address i'll send to you the form.
Best regards,
hendrich
you mean TPE is material ?
if correct, the material (TPE) it is rubber material, so you can molding in injection molding machine.
and you must understanding the knowledge basic for injection...
in my experince, i use hot water for cooling system with temperature 100 until 140 deg F as mold temperature controll capable. and for the brand i suggest to using Kawata product.
and in my...