I have now changed both pumps ... twice!
When I probe GG1 I get noise and 2500 psi at port 72.
When I probe LC I get noise but it is a different sound.
When I pulled the cover off the...
Type: Posts; User: MNDesign81; Keyword(s):
I have now changed both pumps ... twice!
When I probe GG1 I get noise and 2500 psi at port 72.
When I probe LC I get noise but it is a different sound.
When I pulled the cover off the...
I suspect your customer hired a recently graduated engineering student.
I used to work for a molder specializing in cosmetic packaging. We had a "standard" of a Delta E of <3.
The QC Lab used a...
I haven't removed the cover but I did see that box was leaking oil!
Contact cleaner or replacement??
I pulled the tank cover. I do not see any aeration when the press is operating.
We drained the tank. Suction filters are clean. The butterfly valves are not broken & operate as they should.
We...
Press idles quietly but makes a ton of noise on any movement.
Oil is good quality, clean.
Changed both pumps variable volume & the vane pump.
Found the vane pump really scored up.
Still the same...
Thanks Bryan.
Turns out the limit switch on the top of the clamp end had come loose from its bracket & was not getting the signal the line had pressurized.
Turned on the pump & cycled the switch a...
I didn't see an error code?
Just .... Auto Lube Failed - Cycle Inhibit
I have a 2001 Powerline 330 that has locked itself out with an auto lube failure.
The reservoir has grease, the system is pressurized at 20 psi & the limit switch on the clamp side is working [light...
Great.
Thank you!
Mike
Can someone give me an idea how long it should take?
Thanks in advance.
Schwertle Stamp in CT.
Been buying dual durometer silicone dies from them for years
I had this problem running a 4 cavity family mold in my 75 ton, 4 oz & 150 ton, 8 oz presses.
It happened using real Celcon as well as Iupital & another Korean POM [unfilled, black].
We pre dry the...
I'm not an electrician but I am on a 208 3Y service.
My 220V presses run on 208 without issues. Less than a 10% differential.
My 240V presses required a "buck & boost" transformer because it...
This will do it for you
http://www.ppe.com/content/Flipbook/17cat/files/basic-html/page132.html
We used to be an all VanDorn shop.
Recently was have expanded to Nissei, Boy & Milacron.
An independent can probably handle all brands.
I had a guy who used to come up from Delaware....
Looking for an independent machine service tech.
Currently having an issue with a Nissei FS360
Anyone in the NY Metro area?
I'm on Long Island, central Nassau County.
Thanks in advance.
I'm in New York.
I do not want to go the landfill route.
At one point I was handling an auction for the SPE NY Section. Donations to benefit our scholarship fund. I had someone who wanted to donate...
Maybe for some of the old colors & from the larger manufacturers.
Most come from a small local supplier that does not provide them.
On Saturday we went through & organized our "color room". In the 1990's we went to exclusively color concentrates.
Since then we have collected " a ton" of obsolete colorants, not to mention the dry...
I disagree with processchris. We run AL molds all the time with none of the sub components mentioned. ABS, Nylon even Acetal run with no issues. Support pillars [because they're off the shelf &...
Hi. New guy here.
We run all aluminum molds all the time. 75 to 500 ton 1 to 24 cavities.
Most of our molds are built with 7075-T6 aircraft grade aluminum. QC-10 is a premium aluminum specifically...
OK. On the advice of a machine tech friend I put a jumper from wire 69 to 101 on the terminal strip.
Bingo .... I'm able to clear the alarm & the machine functions normally.
That bypasses R 100 a...
Hi All. New guy here. Not new to molding, just the forum.
I have an 1986 Nissei 360 with the NC-8000 control [yes, I know ancient]
It has been sitting in the shop for several years & I just got...