Upon cleaning my screw from my Shinwa, I've noticed a gouge has been taken out of it. It's pretty deep, about 1/8" deep by 1/4" wide. Along with that, tons of scratches. Can someone confirm that this is the cause of my specks?
Printable View
Upon cleaning my screw from my Shinwa, I've noticed a gouge has been taken out of it. It's pretty deep, about 1/8" deep by 1/4" wide. Along with that, tons of scratches. Can someone confirm that this is the cause of my specks?
What color were the specks? Blue I believe? I'd say that was from the resin as many light colors have some blue added to offset the yellowing that can occurr when melting.
Now you do need to fix the problem; what does the barrel look like? I'd expect some damage since the screw was so bad. You could opt to have the screw welded and chromed again. Or contact someone for a replacement. I can get you the names of some folks that should be able to help for a good price.
Rick.
Dear,
Better you can see your machine manual,they may given you the exact details off pulling the screw with all the details like LH thread and other details.
mani