1 Attachment(s)
Re: Charging time deviation!
Attachment 596
Sorry i forgot this infor
Re: Charging time deviation!
Hello Rob,
It could be one of the following:
1. Your back zone temperatures are too low or too high both of which is making the pellets and/or the plastic slip.
2. The back pressure is again too high or too low.
3. The screw speed is tooo high.
Is the cushion remaining constant?
-Suhas
Re: Charging time deviation!
I see, that the cushion is also not stable. May be stupid idea, but please check also if the material way is not blocked, baked bulk of material in throat (jumping on the screw), magnet in hopper in "bad" position etc. Please check also the screw through throat, if is clean...