View Full Version : New machine evaluation / testing
futuremolding
30th November 2017, 07:46 AM
We are in the process of procuring new PVC injection molding machines and we have to test the machines at the machine manufacturers side. Does anyone suggest what are the important points should consider while testing machines. Some of the scope includes
fill time consistency
shot size consistency
transfer time consistency
load sensitivity test
pump motor vibrations/abnormal sound
hydraulic leaks
Does anyone can help with a format/template for machine evaluation form.... Thanks in advance
brentb
30th November 2017, 04:55 PM
Are these new presses?
KOM
brent
Joel JS
30th November 2017, 09:48 PM
Looks like you've got the main ones...... RJG has a tryout/performance list, I can't remember if it has anything you don't, but it would be worth a look.
Joel
JayDub
1st December 2017, 04:56 PM
Stating the obvious, but – check and double check all safety features.
Watch the barrel heats to see how far they fluctuate.
Do a fill linearity study: Make shots at a range of speeds from maximum to very slow. Record actual fill time. Graph fill time versus speed setting. It should give you a dead straight line. If the line falls off at the top end, the machine is not producing the speed it claims it is.
futuremolding
4th December 2017, 09:14 AM
Are these new presses?
KOM
brent
hi Brent,
These are new machines.
futuremolding
4th December 2017, 09:17 AM
Hi Jay,
Thanks for the help
futuremolding
4th December 2017, 09:20 AM
hi Joel,
Thanks for the help. Sure will check it ..
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.