Suhas
25th August 2011, 04:21 PM
How much of Cavity imbalance do you accept at your company?
efauth3
25th August 2011, 06:56 PM
less than 5%
Process King
25th August 2011, 07:06 PM
Would be nice!
Danny R
25th August 2011, 09:53 PM
How much of Cavity imbalance do you accept at your company?
As acceptable as the customer will allow. First, the customer specification range should be identified. If cavities are inbalanced but still meets Cp, CpK requirements then you're golden.
Cp≥1.33 Good!
1.0≤Cp<1.33 Adequate.
Cp<1.0 Inadequate.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.