Klockner Ferromatik FM175 1990 p.d.

[Fedorchuk Dmytro]

Good day! Please help who knows -- not enough clamping force. Maximum 720 KN achived while 800KN is minimum clamping force to set.Please give me an advice where to search for the problem.

[ijchan223]

i am not familiar with the machine, but if it isn't making tonnage on a toggle machine i would check the linkages and see if the cylinder is loose.

[Fedorchuk Dmytro]

Problem solved! After changing few pomps the prussure was achieved after fixing oil purity sensor. Obviously there was no need to change pumps.